NanoCharge BOOST Submittal

SUBMITTAL / SPECIFICATIONS

The WellAir NanoCharge BOOST is an automatic self-cleaning needlepoint uni-polar ionizer designed for boosting MERV filter performance in both commercial and residential applications. The NanoCharge BOOST negatively charges airborne contaminants upstream of the MERV filter thus significantly increasing its effectiveness of trapping them.

This compact unit automatically removes dust and dirt build-up on the emitters eliminating the need for any maintenance. Utilizing built in magnets it can be rapidly installed before the filter. The NanoCharge BOOST is UL 2998 validated for zero ozone emissions and creates no other harmful by-products like formaldehyde, or particulates.

SPECIFICATIONS (SKU 100075):

Filter Capacity . . . . . . . . . 2 x 24" x 24" MERV filter @ 500 fpm

Pressure Drop . . . . . . . . . . . . . . . . . . . . . . Less than 0.01 In. WG

Housing Material . . . . . . . . . . . . . . . . . . . PC-ABS Plastic Blend

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.57 lbs | 0.26 Kg

Maximum Operating Temperature . . . . . . . . . . . 131 °F (55 °C)

Ionization Module:

Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Negative Ionization

Mode of Operation . . . . . . . . . . . . . . . . . . . . . . . . Brush Type

Self-Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Automated

Electrical:

Input Voltages . . . . . . . . . . . . . . . . . . . . . . . . . . . 24V-240V AC

Power Consumption . . . . . . . . . . . . . . . . Less than 8.5 Watts

Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50/60 Hertz

Lead Wires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40" (L)

FEATURES:

• Significantly boosts MERV filtration for viruses, bacteria and ultra-fine PM

• Ability to connect to a range of input voltages from 24V AC to 240V AC

• Magnet mounting for rapid installation

• Factory programmed for auto-cleaning once per day and on ionizer unit start up

• Includes dry contacts for Building Automation System (BAS).

• Multiple units can be daisy chained into a single alarm contact

COMPLIANCE AND CERTIFICATIONS:

UL 867, CSA C22.2 #187, UL 2998, RoHS2, CE, FCC Part 15